High-Quality Sensors
The ultimate smoke and air ventilation system for elevator shafts with air quality measurement and smoke detection.
It consists of a smoke extraction system, a plastic suction pipe, a filter and service unit, a motorized louvre valve, and a display. These technologies enable us to close mandatory openings in elevator shafts and continuously detect the smallest smoke particles via the enev-kit. The result: perfect air quality in every building!
The enev-kit is the best smoke and air ventilation system for elevator shafts. Fully automated and completely tailored to your elevator shaft. Traditional elevator shafts are equipped with a mandatory permanent opening through which a lot of warm (or cold) air can escape. With the Enev-kit, it is possible to close this opening and better regulate the indoor climate of the building. The system measures the indoor climate and initiates controlled ventilation intervals based on this. This happens when:
The system automatically opens the louvre valve in case of smoke detection, power failure, or other disturbances and set ventilation functions.
The smoke extraction system (SES) is continuously detecting smoke traces. If smoke is detected, the built-in louvre valve automatically opens, allowing smoke to escape unhindered.
In the event of a power failure, the valve opens via a spring mechanism to ensure safety in the building. If there is no smoke or disturbance, the louvre valve is closed. This prevents heat from escaping from the building, except for the controlled ventilation intervals and set functions.
Easy Insight
On the display of the enev-kit, you can easily gain insight into the system’s status.
For example, you can view all climate information per space. Think of the CO2 ventilation value and the temperature in the elevator shaft. An additional option is monitoring the humidity.
With this function, the risk of moisture and mold is a thing of the past, and a good and safe air condition is guaranteed.
Every building deserves a sustainable, smart solution. A solution that is good for the environment, saves energy costs, and reduces CO2 emissions. The enev-kit is installation independent and suitable for both new construction and existing buildings. In both cases, this investment can yield significant benefits. A better air climate in your elevator shaft, less noise pollution, a better energy label, and not to forget, reduced energy costs. For both existing buildings and new constructions, this investment will yield a positive return within 3 to 5 years!
Head Office
Aleatec GmbH
Buschkoppel 1,
21493 Schwarzenbek
Germany
Phone: +49 4151 8329360
E-mail: info@aleatec.de
Office South-Germany
Aleatec Süd GmbH
Adres: Daimlerstraße 22,
72649 Wolfschlugen
Germany
Tel: +49 7022 279926-0
E-mail: sued@aleatec.de
Office Benelux
InBuilding B.V.
Grondzijl 6B,
9731 DG Groningen,
The Netherlands
Tel: +31 85 303 48 77
E-mail: info@inbuilding.nl
Follow us
